32:I[53470,["352","static/chunks/352-3ee02a3105c218db.js","4166","static/chunks/4166-8ca60d5be3e3329a.js","6874","static/chunks/6874-98a7f8268e192452.js","5784","static/chunks/5784-415ddf12556d8261.js","7399","static/chunks/7399-26b15dbcfe6c3d55.js","3063","static/chunks/3063-7cbe9e548a8d185f.js","6164","static/chunks/6164-a50bbfcb42ebb48e.js","253","static/chunks/253-da62e547742b6bee.js","1215","static/chunks/1215-9f9273b0bbbfb83a.js","5607","static/chunks/5607-9fccc14341fbf147.js","9164","static/chunks/9164-5de9886fbddf12ff.js","6252","static/chunks/6252-11d0c66f47fdb9a4.js","3204","static/chunks/3204-4edb24a55565b312.js","3470","static/chunks/3470-895a517adcd16c6c.js","4573","static/chunks/4573-0b6f4331c61ce283.js","3357","static/chunks/app/(storefront)/(main)/categories/%5B...category%5D/page-9d5cd25a3f84346f.js"],"default"] 33:T5ff,

Holinger Engineering HGK-HA Strain Gauge Gearknob - M10x1.25mm - H pattern analogue output.

SHIFT CUT GEAR KNOB

- Holinger Engineering has developed a gear lever mounted trigger device to enable an engine fuel/ignition cut via the engine management system. This will enable the user to effectively unload the gearbox, prior to performing a gear change.

- The knob is easily installed on H-Pattern Holinger gearboxes.

- It requires an engine ECU capable of receiving an analogue or digital input channel for shift-cut triggering.

- The integrated electronics and sensor are contained within the hand piece and require no adjustment.

- The device requires a good ground and 12volt supply.

- In the neutral position the analogue voltage readout from the white signal wire will read 2.5V +/- 0.1V, with a maximum readout of 5V, and minimum of 0V.

- It is recommended that the trigger voltages be programmed between these two ranges, with an acceptable dwell level around the neutral position.

- The green digital output provides a grounding signal when activated (~10kg gear lever load). The

Holinger Engineering HGK-H Strain Gauge Gearknob - M10X1.25MM